Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Prindle 16 Dolphin Striker Rod Issues

[quote=bobcatnj]Murrays has the replacement screw for the bottom, I had a similar issue with a frozen DS and flex in the aluminum piece. I drilled out the rivets took the mast base and rod to the bench vice and hit it with corrosion x daily for about a week. I got it to move a tiny bit then hit it with a blowtorch, gently since the casting is AL. Then it freed up. After all that, the AL band was still loose so I added some SS washers to the bracket to make the DS a bit longer and secured it with the SS Screw. hull flier makes a valid point worth noting... test for flex with the mast up...otherwise you may find a frustrating way to spend an afternoon[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.