Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: remove tramp on a nacra 450

[quote=carolinacatamarans]The beam may be bedded with 5200. If you have removed the 2 bolts and it won't budge, I would use a board and place it under the beam in a way that it supports the boats weight. Make sure the hull cannot drop too far without being supported as well, but leave a gap for it to drop. Then use a heat gun inside of the beam to loosen the adhesive and slowly work it off. You might try to pass a thin wire through the bed.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.