[quote=Deuce]Soldering is definitely the way to go, but I would suggest cleaning the solder joints with acetone or brake clean to get rid of the flux from soldering the joint. Then use a product called "Liquid Tape" brushing the joint and up the plastic coated wire at least a half inch. I put on two coats, this will keep any salt from getting to your wires. Keep the Liquid Tape lid on snug, but even then after a period of time, you will notice it thickening up. Don't throw it away, add acetone to the container a little at a time, stirring it in, and it will thin back out for use.
[quote]I soldered all the wire connections and used plastic flexible conduit to give the wires a little protection from the elements.[/quote][/quote]
No HTML tags allowed (except inside [code][/code] tags)
