Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Prindle Traveler car with stainless steel rollers???

[quote=rwj0j0][quote=klozhald] so you should run a bungee from the dolphin striker post under the tramp to the grommet in the center of your tramp with a loop in the bungee that stays on the top of the tramp. While you are rigging and before you tie the two lines together, run the mainsheet through the loop in the end of the bungee and then tie the mainsheet to the traveler. The bungee will keep the bulk of the mainsheet on the tramp so that it won't slide off the deck into the water as often.Edited by klozhald on Aug 28, 2013 - 03:51 PM. [/quote] That sounds like a good idea! I keep dropping line into the water out on the wire... THANK YOU![/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.