Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Prindle Traveler car with stainless steel rollers???

[quote=vinnyvincent]We'll jeez they are charging the same price as they were for the stainless ones. That alone makes me not want to buy that item from them. Thanks you for calling them. I am wondering if I just sand down my track and spray some silicone on the track and rollers if that will work for a while. They aren't worn to the point of falling off or anything. I just notice my traveler doesn't want to...well, travel. There are small burrs along the tracks and the rollers are a little chipped/worn down to the point that it wobbles. It just seems like a lot of work drilling out and replacing all those stainless rivets and removing the crossbar bolts, just to slap another piece of junk on there. Sometimes I have to push or even kick it over. I've capsized a few times while tacking in heavy air because the main sail got stuck on the windward side and I couldn't push it over in time. Has anyone ever done something like rivet a Harken traveler track onto their crossbar as an upgrade? It seems do-able....I would bet it works a lot better than the factory traveler.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.