Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: When good Samaritan goes bad

[quote=klozhald][quote=MN3]used epoxy instead of screws with backing plates[/quote] ...and chose to use an ill-fitting portal to boot. The material he needed to buildup the lateral mating surfaces looks close to 3/4" thick. No filler, putty or resin would have held in this situation. [quote=MN3]i am no repair guy but i would be worried about using Solarez (and similar ) as they will probably not shrink and expand the same way the glass/epoxy/gelcoat in the hulls do [/quote] Solarez Extreme [i]is [/i]epoxy. It is also insanely strong. "Our strongest repair putty, Filled with glass and ceramic fibers, this vinyl ester epoxy putty is incredibly tough, corrosion resistant and has great adhesion." I have 30+ repairs on my hulls and foils that are three years old and showing no indication of being anything but fixed.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.