[quote=klozhald]Three possible leaks on a P19 are the porthole, the drain plug and the crossbars where they are bedded to the hulls. Look for any place on the hull where someone did some work and may have altered the integrity of the hull.
Wolfman's process should find you the leak. [b]Pour [/b]the soapy water on the crossbar beds and wait a minute. Sometimes a lots of silicone was used to bed the crossbars and it breaks over time but the leak is under the crossbar and a light spraying may not be enough to get proper bubble volume under the crossbar.
If all this fails to locate your problem, remove your centerboard and look in the well. Rocks get caught in the well, pinched between the board and wall, that are sometimes pushed through the wall when the board is raised or lowered. Also check the area of the centerboard pivot at the bottom forward part of the well.
Here's hoping you find the leak in an easy place to fix.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
