Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Hobie 14 Mast Head Question

[quote=DamonLinkous]At the top of the mast there is a round casting that has the main halyard sheave inside. Mine has some kind of extra piece attached to the bolt, looks like it was probably a mast-head wind vane. Also the bolt is extremely rusty, I'm assuming the original stainless was replaced with a hardware store bolt at some point, maybe when they installed the wind vane. Can I simply remove the rusty bolt and extra piece and replace with a stainless bolt? Looking at the parts guide it looks like this whole assembly has been replaced by a part with two sheaves. Also, my whole casting is loose from the mast, it's only held on by two rivets, one on each side, just pop in better rivets? [img]http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=86751&g2_serialNumber=3[/img][/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.