Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Its Official... 6" X 6" Storm Hole in port Hull between pylons..... Bummer/Questions

[quote=MN3]From Jake on another site "A trick I've used in the past is to cut several pieces of wood tongue depressors and glue them to the inside surface of the hole so they overlap the repair piece. Clamp them in place with clothes pins or something similar. Once they cure, they'll provide a shelf for the cut-out repair piece to sit on so your exterior is perfectly flush." [quote] I think you basically wet out a piece of glass on some wax paper and let it dry, It will be slightly flexibleafter curing. Once dry run a couple pieces of fishing line through the patch with big knots on one side so it won't pull through. Put some wet resin on the patch[/quote][/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.