Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: What products to use on large delamination repair of P-16 decks?

[quote=coastrat]i have done large repairs using both west and 3m/bondo...no difference at all. 36 year old beater boat rode hard and put up wet...i try to destroy my 500$ boat and can't...i can't justify west for big delam repairs on antique boats. prindles are always soft on the front decks because people always want to sit/walk on them-don't let them! just make sure you have all prep completed before you start to inject and get after it. the biggest problem with polyester resin is old mek peroxide activator...just buy a new gallon and no problems/old activator doesn't always work. have a couple of syringes ready to go and by the time the first one starts to set up, use another leaving the plunger in the first one. when the second one starts to set up, pull the plunger out of the first one and the excess resin comes with it. i have re-used syringes several times. it's cheap and easy to do these repairs![/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.