[quote=yurdle][quote=PDS624]this is a lot easier than it first seams. the masts should be similar enough in diameter and shape so drill out the 3 rivets (3/16 bit and stainless steel rivets most likely) that hold the mast bases on and you can swap them out no problem. put the hobie base on the prindle mast and you will never have to turn your mast 90 sideways to raise and lower it again.[/quote]
I'd be really surprised to find out that this is true.
The Nacra and prindle mast extrusions are 1cm different in circumference IIRC, so there is no way the bases will interchange, and those came from the same company.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
