[quote=captedteach]Easy enuff - re drill the pivot hole. Set the boat on the trailer and get it so the water line is level Drop the boards and see where they are in relation to the hull. A level will get you to perpendicular. If you can not get to perpendicular remove the bolt holding the rudder Keep the lower part of the blade against the casting and move the top until perpendicular is achieved. Mark the blade thru bolt hole in the casting with a sharpie and drill. Go sailing to check progress If it works for you then fill old hole with epoxy and your done.[/quote]
No HTML tags allowed (except inside [code][/code] tags)