[quote=phantom917]Adam, here is what I did. I rounded up all of the lost bearings till I had the right number. Then I carefully re-inserted them back into their pockets, one side at a time. When one side was done, I wrapped a rubber band around that side to keep them from falling out while I worked on the other side. Then I cut a simple spacer that held the balls in place as I slid it onto the track. It took about 25 minutes and cost less than ten cents in materials. See photos.
[img]http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=101102&g2_serialNumber=4[/img]
[img]http://www.thebeachcats.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=101105&g2_serialNumber=4[/img]
Hope this helps,
Bill[/quote]
No HTML tags allowed (except inside [code][/code] tags)
