Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Hobie 14 Turbo rig tension?

[quote=DanBerger]You want it tight. Not banjo string tight, but tight enough so that the mast still rotates. You are also going to want rake in your mast. I got mine to rake by lengthening the forestay ABOVE the upper furler/pig tail. I put the sidestays in the lowest hole of the adjusters, then adjusted the rig tension with the adjuster on the forestay. I did it that way because I wanted the jib to attach to the furler as low as it could. You can put an adjuster down low to make it easier, but I think you get better performance my way. Also, I cut down some Hobie 16 rigging to rig my 14 like a little 16. That was the best set up, but you lose the furler.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.