Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Spirit 17 in Rehab

[quote=smackdaddy]Okay a bit more progress... The mast was pretty banged up, stained, scratched, you name it. Here's a couple of pics of the before... [IMG]http://i449.photobucket.com/albums/qq219/smackdaddy_photo/Cat_Progress/45dd12be.jpg[/IMG] [IMG]http://i449.photobucket.com/albums/qq219/smackdaddy_photo/Cat_Progress/4a7d3740.jpg[/IMG] [IMG]http://i449.photobucket.com/albums/qq219/smackdaddy_photo/Cat_Progress/a31c0e11.jpg[/IMG] [IMG]http://i449.photobucket.com/albums/qq219/smackdaddy_photo/Cat_Progress/30753b63.jpg[/IMG] I had already painted the castings with a satin black spray paint - and I had a can or two extra, so I thought, what the hell, and tore into the mast. First, I power-washed the whole thing, used a scrubber to get the heavy stuff off, then did a final pass with acetone on anything gooey. I DID NOT get crazy with sanding, fairing the rough spots or dents, etc. I didn't care about that stuff...I just wanted it to look good from 10' away. After that, I taped off the shiny bits, donned the mask and rattled the can...then... [IMG]http://i449.photobucket.com/albums/qq219/smackdaddy_photo/Cat_Progress/bcc4e341.jpg[/IMG] [IMG]http://i449.photobucket.com/albums/qq219/smackdaddy_photo/Cat_Progress/414d8c06.jpg[/IMG] I put on 2 coats along the whole thing - and it was looking okay... [IMG]http://i449.photobucket.com/albums/qq219/smackdaddy_photo/Cat_Progress/c2a11946.jpg[/IMG] The problem was, I couldn't quite figure out how to blend the paint well enough to get rid of the overspray pattern... [IMG]http://i449.photobucket.com/albums/qq219/smackdaddy_photo/Cat_Progress/a4417277.jpg[/IMG] There would be beautiful shiny spots, then dull spots. That just wouldn't do. So, I hopped on Youtube and looked up "spray painting a car" - and found a video that explained it. I was "doing it backwards". In other words, I was getting a really nice flow on the broad part of the mast - then I'd go to the leading/traling edges and screw up what I'd just done. I switched it...spraying a clean flow on the edges, then doing the broad side. Worked like magic... [IMG]http://i449.photobucket.com/albums/qq219/smackdaddy_photo/Cat_Progress/10ed3ea7.jpg[/IMG] [IMG]http://i449.photobucket.com/albums/qq219/smackdaddy_photo/Cat_Progress/932a1a33.jpg[/IMG] [IMG]http://i449.photobucket.com/albums/qq219/smackdaddy_photo/Cat_Progress/26c41298.jpg[/IMG] Not bad for Valspar spray paint eh? We'll see how long it lasts before it's trashed. Even then though, at $4 a can, I can do A LOT of touch up for cheap. I used about 9 cans of spray paint ($36) - and spent a total of maybe 5 hours doing this thing. Next comes painting the hulls. Stay tuned!<!-- editby --><em>Edited by smackdaddy on Aug 10, 2012 - 08:21 PM.</em><!-- end editby --> [/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.