[quote=MN3]If you do more trailering with it, i would recommend you remove the rudders completely. they should come off very easily by removing the pin (unless the pin is corroded into place)
Like many cats, the rudder castings and mech are the weakest part of this boat. the castings are made of pot alum and will eventually crack. there are very slight "ramps" (or notches) that are used to hold the rudders in the UP position (on the water/beach) and lots of care should be given to this part of the casting (gently lift when locking in the up position).[/quote]
No HTML tags allowed (except inside [code][/code] tags)
