[quote=Quarath]Was it between the stop swaggs and the main. I would think there it would be an issue but if it is below the swaggs when the main is up there is not going to be any pressure on it except when raising and lowering the main.
I just need to verify what the wire rope diameter should be for and or the working load. I found 1/8 inch stainless wire rope with a 1760 lb working load for $34.95 for a 200 ft roll. I'm just not sure if that is too big or not flexible enough or strong enough.[/quote]
No HTML tags allowed (except inside [code][/code] tags)