[quote=daniel_t]keschwa,
Your mainsheet may or may not be reeved incorrectly. It could be simply twisted.
It looks like a 7:1 setup, with four sheaves on the bottom and three on the top.
I would reeve it as follows:
1) run the bitter end through the cam cleat ring and into the bottom-middle sheave.
2) then up through the back of the top middle sheave.
3) then run it down through the front of the bottom left sheave
4) then run it up through the back of the top left sheave
5) then run it down through the left side of the lateral sheave
6) then up through the front of the top right sheave
7) then down through the back of the bottom right sheave
8) then up to the ring and tie it off.
Hope this helps.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
