[quote=klozhald][quote=dtfuqua]Are you sure you weren't bottoming the tube out in the inside layer of glass? I couldn't get anywhere with injecting it till I cut the tip off short enough for the shoulder of the syringe tip to rest on the outside layer and the open tip just under the surface.[/quote]
When you cut the tip, do it at an angle so even if you do bottom out, you can still inject the goo. It will also give you some ability to direct the flow, so be sure to spin the syringe as you squeeze to get maximum delivery in the space.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
