Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Pulling the deck, splitting the hulls - old hobies, prindles

[quote=spoulton]I used the drill and fill method last year on some rather large delaminated areas on my Prindle 18 with good results. However, on larger areas of delamination filling can lead to some seperation of layers of hull. I know some use a vacum appartus to prevent this but have recently read one preson recommending putting screws between layers and removing after resin sets then filling holes. Anyone have any experience with this technique to prevent hull seperation?[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.