[quote=KennyB]It's always best to repair the nicks and dings with fiberglass first, then you can gelcoat. If you want to spray with a paint gun, you need to add 1/2 Duratec high gloss additive (it's $85 a gallon, but worth it) and 1/2 gelcoat. This will give you a much better finish and a lot less wet sanding to get it to a smooth high glass finish. When you add the MEKP...just catalyse the gelcoat not the Duratec. I use 10 cc's per 1 pint of gelcoat, so if you fill the quart cup, only put 10 cc's. If you decide not to use the Duratec, you can't use a paint gun, you will have to use a gelcoat cup gun or roll on a couple of coats, these methods require a considerable amount of sanding. Hope this helps.<!-- editby --><em>Edited by KennyB on Mar 23, 2012 - 05:51 AM.</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)
