Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: curved inspection ports on a Prindle hull

[quote=Rider_55]Consider using polyester resin available at auto parts stores and Wal-mart. It is generally cheaper and you can gelcoat it in the future if you want to. I use epoxy for internal repairs and polyester for external repairs. If you are worried about creating a weak spot around the port add a few layers of epoxy fiberglass on the inside of the hulls around the edge of the port. Also be sure to dig out a little bit of the foam core and refill the space between the voids with thickened epoxy or polyester resin. I just used baby powder for a thickener and it works great. Handy cheap, and effective.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.