Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: curved inspection ports on a Prindle hull

[quote=bobcatnj]Check the West manual Figure 19 p9 "creating a base" I'm no expert but the thickened stuff is pretty easy to work with. Go with some 406 for strength and 410 or 409 to fair. Keep in mind that if the gap is more than 1/2 don't fill it in 2 coats to prevent a melt down. - Don't ask how I know that Also you will need to paint / gel over the epoxy or it will yellow and deteriorate.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.