Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: estimated diamond wire tension help/guidance

[quote=turbohobo]According to the P18 manual:- "Adjusting the tension of the diamond wires should be done with care, after the mast has been stepped, but before the sails are hoisted, adjust both wires to the same tightness, if one is looser than the other, your mast will bend more on one tack than the other. Push/squeeze both wires towards the mast with equal tension at the same time. The wires should touch the mast at least 12 Inches above the lower attachment point, but not more than 20 inches above. [b]If diamond wires are too tight, your mast will not bend, and undue strain will be put on these wires.[/b]" [url]http://www.thebeachcats.com/pictures/?g2_itemId=75707&g2_imageViewsIndex=1[/url][/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.