Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: p16 jibsheet/barberhauler system rigging

[quote=makinmajik]Sorting through the rigging, I do have the barberhauler hardware attached to the jib sheet. If any of you run the barberhauler, can you tell me if this is the way it rigs.? The manual says it is 16' of 1/4" line. It appears that it attaches to each block,(mid way on the sheet), runs thru the block on the beam, and thru the jam cleat on each side. The question is, does it run over the top of the block on the beam, under to the jam cleat? I am replacing all the rigging, and would like to get it right. Also, if you do run this rig, is 16' long enough. I am thinking of getting red line to differentiate with the black jib sheet and 20' would be easier to find.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.