Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: ~~ Bent Mast~~

[quote=popeyez7]~~ I have a mast from a 16 Hobie that has a ' slight but noticable' bend in it... There's no kinks & the sail-track is good. I wanna make a bigger ice boat this year, if time allows it ?? I've tried steady pressure on the mast with weights using cinder blocks that I put into a small boat that I have... Here's the way I did it. I put the mast on the ground, then put some wood blocks under it at the ends so it was raised off the ground about a little more than 2'. I used a rope on the bow to suppened the front of the boat, I put the back of the boat on the mast, then I put the cin. blocks in the back of the boat so all the weight would be in one spot... I probably used about 5-6 blocks. Not sure how much it weighed, but it was alot. I left it like that for about 2 weeks... Still no change ! :roll: I was hoping TIME would do it ? I'am running outta time !!!! Any ideas anyone ?? (besides using my truck, I did try the lawn mower, that didn't work--I didn't wanna kink it) Some one have a mast they wanna sell ???[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.