Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Can't tighten P16 dolphin striker

[quote=pirateboy27]sorry to tell you, but this could get real ugly. I drilled out the rivets and removwed the base casting from the beam. I'm a machinist with all the tools (including torch!) I need, and it took me DAYS of effort to get it loose. In the end I removed so much thread from the aluminum casting that I had to install a giant Heli-coil thread insert, and had to make a new rod. My low buck sugestion is to drill out the rivets, and put a ss washer or two below the rod to take up the excess space. The only other choice is a new casting and rod. Hope this helps[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.