Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: shroud back-up rig

[quote=Edchris177]Measure your old shroud, from pull to pull, there is probably a diagram somewhere on Murrays that shows a pictorial of pull to pull, then order two of them. Something else might have been modified, & the standard shroud may not be the best fit. You may also want to inspect your forestay, & order one of those too if it is the same age as the shrouds. If it lets go you lose the mast. Think a bit about future considerations, if you want to add roller furling, you need a shorter forestay. The ends of the stay can be thimbles or eyes, it all depends on what is on the end of the bridle wires, & what you want to do as the end result. Enjoy your boat, I had my old 5.7 up to 21 mph yesterday.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.