Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Nacra 5.0 mast base casting removal and re-sealing

[quote=bh3700]My 5.0 had the old style base. It was riveted on with three rivets. After drilling out the rivets, it just slide off. I put on the captive ball mast base, but it did not fit over the enter base. To seal the mast, I put styrofoam in the base and sealed it with silicon. Did anyone else run into this ? Did you leave the bottom open and seal everything above the base? Did the base of the mast change in later years to account for the new casting shape? Here are the old and new bases. [img]https://lh3.googleusercontent.com/-GFBG7EWNx0k/TJAX2c797XI/AAAAAAAABC4/RTKhJXijgTI/s400/CRW_6895.jpg[/img] [img]https://lh6.googleusercontent.com/-FGd6UvvrFLY/TJAX2cXUNFI/AAAAAAAABC8/XiA0uSf5jTU/s400/CRW_6897.jpg[/img] [img]https://lh6.googleusercontent.com/-KvR_-LuvJ80/TJAX3K1h7lI/AAAAAAAABDE/W4I6hR16FUk/s400/IMG_2904.jpg[/img][/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.