Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: pic request: jibsheet tangle preventer

[quote=Quarath]Basically all you need to do is make a triangle witha piece of shock cord. Each end attached somewhere beam level towards the outside of the beam and the center of the shock cord forms teh point of your triangle. I have a small carabiner tied to my mast between where the diamond wires meet. When i rig the boat to sail I just lift the center of the shock cord and slip it into the carbiner to make the point. When I put the boat away I take it out of the carabiner so I can step the mast and just leave the shock cord along the front beam. right now the shock cord ends are tied to another line I have on either side of the front beam but in the past I had just tied it to the outer edges of the "V" of the dolphin stryker.[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.