[quote=coastrat]use 3/16" line, 1/4" is too big. here's what i did: if you have one side working good then do the other side just like it...in other words, do one side at a time so you have something to go by. the main thing is to run the line on either side or the tiller crossbar bolt. this is the biggest learning curve on a prindle without a doubt. after working with it for a while it makes sense but make sure to only break down one side at a time. do the other side a mirror image of the first side. good luck![/quote]
No HTML tags allowed (except inside [code][/code] tags)