Welcome anonymous guest

Please Support
TheBeachcats.com

Reply to: Nacra 5.2 pulling to port

[quote=nacraman57]Look at your rudder castings and you will see a pin below the rudder arm rivets. Your rudder pull down rope has to go OVER this pin or the rudder won't "slam home" in the rudder casting. One slow sailing day I decided to replace those ropes on my rudders as they were getting a little frayed. Well, after a few malt beverages I managed to feed the rope UNDER that pin on the port rudder and ended up with the same WTF head scratcher you describe[/quote]

No HTML tags allowed (except inside [code][/code] tags)

  • Options

  • 0 users

This list is based on users active over the last 60 minutes.

Upcoming Beachcats Events

VIEW FULL CALENDAR

No upcoming events.