[quote=Wolfman]There shoudl be little or no side to side play once you have tightened the bushing in place. You can make plastic washers using milk jugs and scissors or use nylon washers from the local hardware store to shim the boards in the castings. Delrin or UHMW would probably be even better but the other two are easily obtainable and work fine.
Remove as much play as possible without restricting the up/down pivoting of hte boards.
I need to do the same with mine as soon as I get the opportunity. <!-- editby --><em>edited by: Wolfman, Jul 03, 2010 - 09:40 PM</em><!-- end editby --> [/quote]
No HTML tags allowed (except inside [code][/code] tags)
