[quote=HULLFLYER]You can just add another nicro press fitting at the proper spot for reefing. Just cut the halyard at the thimble where the rope halyard meets the wire halyard, slide the new fitting to its proper place and nicro press it and then replace the thimble and nicro press it. The halyard will only be a few inches shorter and it will not matter as it will be at the opposite end from where the fittings for the fork are located. West marine has all the tools that you need to complete this job, all you have to do is buy the 2 fittings that you will need from them, and they let you use the tools for free.[/quote]
No HTML tags allowed (except inside [code][/code] tags)