[quote=pbegle]Put a milk crate under the hull on land so that rudder can swing down without touching ground. Tools needed are screw driver, 7/16 & 9/16 wrenches. Jam screw driver into hole in rudder to lock inner 9/16 nut. Loosen outer 9/16 nut & turn hook INTO rudder one 360 turn. Tighten outer 9/16 nut & pull out screwdriver. Slam rudder into casting & it should clunk in fairly firm. Usually takes two hands on bottom of rudder to pull it out firmly. Turn hook opposite way if rudder is locking too tightly. Rudder springs are only $5, so replace if necessary. Pete[/quote]
No HTML tags allowed (except inside [code][/code] tags)
