[quote=yurdle][quote=HULLFLYER]It sounds like you are missing 2 very small but important parts. There should be a bushing that goes on the inside of the rudder casting arm that the bolt will go through when you attach the tiller bar. This bushing allows you to tighten the nut properly and will stop the spin. The bushing is actually just a small piece of aluminum tubing that will just fit inside of the tiller arm and just big enough to allow the bolt to go through. This will take care of that problem.[/quote]
So it's a tube that the horizontal bolt runs through that allows me to tighten the hell out the bolts without crushing the casting/tiller arms? Sounds good if i've got that right.[/quote]
No HTML tags allowed (except inside [code][/code] tags)