[quote=clymbon][quote=skarr1]The mast base on my nacra has about a 1.5" flange that fits up into the mast. This flange is the same shape as the inside of the mast. If the hobie base is like that you could use 4 rivets, one fore and one aft on ether side of the bolt hole. [/quote]
That sounds like a good idea. I'll take the base apart and see if that will work.
Now that I think about it, aluminum rivets are probably a better idea than a steel bolt, to avoid electrolysis and corrosion.
[/quote]
No HTML tags allowed (except inside [code][/code] tags)