[quote=yurdle]Yep, the barberhauler on a P18 should have a cheek block very close the ends of the front crossbar, with a V cleat closer to the center. You run a single line from the jib sheet where the barbarhauler hooks to it, through the cheek block (in the tramp side, out the front) straight along the crossbar, passing both cleats, then in the front of the cheek block on the other side, out the back and to the jib sheet.
While it is functional, its a pretty horrible system because the cleat to adjust the barberhauler is always on the leeward side of the boat, and the line usually jammed in there pretty good.
If your cleats and blocks are like I described, I can post a pic of mine if you still need help.
The way to rig the jib sheet itself is exactly as Quarath shows in the diagram above.[/quote]
No HTML tags allowed (except inside [code][/code] tags)
