[quote=VanDee]Recently purchased a Prindle 18 in very good condition but has one problem I didn't notice until I got it home. The bracket attached at the base of the mast that the mast step hinge pin slides into has two rivets on the bottom and two bolts at the top. (The bolts are a fix from a previous owner) The bolts have pulled away from the mast leaving a 1/8" gap between the bracket and the mast. The threads on the mast are stripped as the bolts will not torque down tight. I want to get this fixed before taking the boat out and I am dying to go sailing. Do I go to a metal shop, boat shop, any ideas? [/quote]
No HTML tags allowed (except inside [code][/code] tags)
