|
IMG_1328
on stock SC20s with the cable traveler, the bracket can be secured to the rear beam with 4 large hose clamps, obviating the need to drill the beam. On this boat I've got solid beams, and now a solid traveler track, so this motor mount is attached with si
Date: 12/13/2014
Views: 973
|
IMG_0405
tubing is 2" square. make sure it's long enough to keep the powerhead aft of the tiller crossbar. I drill for one bolt on the rear plate, and then adjust the angle of that plate so the motor is near vertical when down. Then a second bolt is drilled
Date: 12/13/2014
Views: 982
|
IMG_0404
This part is designed to mate to the SC20's rear beam. Easy because it's a round beam, you'll need to have a plate bent to match your rear beam, then have that channel conform to the plate.
Date: 12/13/2014
Views: 903
|
IMG_0403
parts just before drilling for the hinge bolt and bolts that secure the panel that the motor attaches to. A piece o 2" x 6" is screwed to that panel to increase its thickness.
Date: 12/13/2014
Views: 913
|