|
20140723_135926
Hobie wings that were customized to fit on a 20'x10' Mystere
Date: 07/24/2014
Views: 2233
|
20140723_131339
The Hobie mount pipes were cut off. An aluminum bar was machined to fit the Mystere beams & a gusset welded on each side to provide rigidity.
Date: 07/24/2014
Views: 1448
|
20140723_131349
View of the modified Hobie base.
Date: 07/24/2014
Views: 1261
|
20140723_131513
Sunrise tramps relaced with Dyneema cored line that was on sale for 16 cents/ft @ Fogh Marine in Toronto.
Date: 07/24/2014
Views: 1221
|
|
20140723_131258
Underside of machined base showing dimensions.
Date: 07/24/2014
Views: 1160
|
20140723_131308
machined base
Date: 07/24/2014
Views: 1241
|
20140723_133931
Interior of beam. Wings bolt to an SS plate via 2 SS Nylock nuts that were tack welded to plate. The plate is semi captive, it can move around somewhat, to facilitate lining up the bolts, but it cannot be lost inside the beam.The bungee is for the fro
Date: 07/24/2014
Views: 1312
|
20140723_135900
View of mount on front beam
Date: 07/24/2014
Views: 1187
|
|
20140723_134521
SS countersunk bolts give a flush finish
Date: 07/24/2014
Views: 1210
|
20140723_131913
Front starboard mount. Track at top of photo is for a huge forward tramp-full width extending from front beam to front spreader bar (required on the 10' beam setup)
Date: 07/24/2014
Views: 1150
|
20140723_131936
Starboard wing
Date: 07/24/2014
Views: 1234
|
|