Has anyone used these hatch covers on a cat?

https://www.amazon.com/dp…4-11e9-87e6-bda8f79623bc
I bought some white replacements from a popular marine store a few years ago and now they look worse than the nearly 30 yer-old originals I replaced.

--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--
I just installed two 8" Hobie hatches that look this those on my 21. They look great and no more sand stuck in the threads of my old screw in type access ports... icon_wink

I did notice a little water that drips pass the twist and lock handle into my hulls but very little drips through it.

--
Bill 404 21SE
--
Thx Bill!
I can live with a couple of drips.
Did you orient them with the hinges inboard?
Do you occasionally have to sit on them?

--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--
I installed these on my Prindle 19. They’ve been working with no leaks. I placed the hinge towards the back thinking I’d have easier access while on the water. I don’t know how well they will hold up sitting on them. Haven’t had to yet. Been out in 15-20 mph winds open ocean heavy chop.
spfxI installed these on my Prindle 19. They’ve been working with no leaks.

Cool, thanks Lance!
Will I see you at the Tri-Point?
Bob Videan

--
Sheet In!
Bob
_/)_____/)_/)____/)____/)_____/)/)__________/)__
Prindle 18-2 #244 "Wakizashi"
Prindle 16 #3690 "Pegasus" Sold (sigh)
AZ Multihull Fleet 42 member
(Way) Past Commodore of Prindle Fleet 14
Arizona, USA
--