www.TheBeachcats.com

1976 Hobie 16 Hulls

Sun, 07 Sep 2025 20:00:43 -0400

by: sduff

Description: Green apple H16 hulls with tramp frame and cross bars and all accoutrements. These hulls are too good to cut up and send to the land fill. They have small access ports in front of cross bar. I would the delamination in this area as very, very mild". They definitely have life left in them and there is still a lot of gloss left in the gelcoat. Can be buffed to a like new condition.

Beach Wheels

Mon, 23 Jun 2025 16:08:30 -0400

by: fetchsammy

Description: Beach Wheels for your A Class Catamaran or any cat with 7' on center hulls. This is a custom built stainless steel axle and aluminum wheel set. Offset handle. A great deal at $200. I had 2 and sold one with my A Cat. The Hull pads are strong but light fiberglass. I keep these at our dock on Planters Wharf Rd, Lusby, Md. but can bring them to our home in Silver Spring, MD if needed for inspection.

misl Harken blocks and pulleys

Sat, 05 Apr 2025 12:25:46 -0400

by: HULLFLYER

Description: Misl blocks, some used for Hooter sail some used for spinnaker some used for multi purchase downhauls systems some have multiple uses To hard to price all of them, but prices will be very reasonable contact with choices and I will give prices

misl Harken blocks and pulleys

Sat, 05 Apr 2025 12:20:07 -0400

by: HULLFLYER

Description: misl Harken blocks and pulleys

Tornado Rudders Extra aluminum casting

Thu, 27 Mar 2025 12:59:13 -0400

by: captainadm

Description: These Rudders came off a late 80's or early 90's Tornado Made in England. In good condition, a bit of cosmetic wear on tips, they measure 35" long 10" wide. Weight 6.5Lbs each. Extra casting included. Buyer pays shipping

Catamaran Beach Wheels Cat Trax Brand with Standard Hull Cradles 10′ Beam

Tue, 18 Mar 2025 10:58:36 -0400

by: stever

Description: Beach wheels made by Florida Sail Craft feature strong aluminum wheel rims with two-ply pneumatic rubber tires that disperse weight and do not dig in. Air pressure can be changed to accommodate the conditions. Delrin roller bearings provide smooth low-friction rolling. I used these wheels only 3 or 4 times and found I preferred to launch my Tornado catamaran (10' beam) off the trailer at the boat ramp. They have been stored inside. If your boat is narrower, the aluminum axle is easy to shorten up, just cut the aluminum axle and drill 2 new holes. Includes sand stake. Pick-up in Dousman, Wisconsin. I can ship if needed.

Righting pole

Fri, 14 Mar 2025 16:50:15 -0400

by: sgerdes

Description: Aluminum righting pole with hinge and stainless wires. Build and used on Supercat 20 tall rig with hinge attached to bottom of dolphin striker support stays and wires attached where hulls met front crossbeam. Pole folded under trampoline and secured at rear crossbeam with bungee . Had a righting line with footloops attached to end of pole.

Aluminum gin pole only

Fri, 14 Mar 2025 15:57:12 -0400

by: sgerdes

Description: Built and used to handle 39‘ mast on 20‘ Supercat tall rig. Photos show it in use on Nacra 18Sq.

2001 NACRA Inter 17 R Mast, Rudders, more..

Mon, 30 Dec 2024 20:00:12 -0500

by: yurdle

Description: Nacra I17R Mast, includes both style bases (neither is currently attached). Good condition. I think its about 32' long, hasn't been shortened or anything from stock. More carbon than it has any right to have, but they made these back when carbon was cheap and didn't worry about the weight. It was later replaced with the aluminum wing mast. I bet it weighs almost twice what the NACRA F16 carbon mast does, but I haven't weigh it. Anyway, Carbon Mast and both bases - $1500 obo I also have two sets of rudders -- a pair of the original skinnier rudders, and 3 of the newer fatter rudders (gen 3 IIRC). One of these has never been used, just bought it for the inevitable day when I destroy more stuff. All 5 Inter rudders - u0 obo I have to part the whole boat out - someone stole & chopped up one of the hulls. If there's something else you're interested in, LMK and I'll make an ad for it. I can supply pics for any/all of the above, just don't have them handy at the moment. Thanks EDIT 1/31/25: added recent pics of the gen 1 and gen 3 (w/ castings) Inter rudders EDIT 8/1/25: They are Gen 2 rudders, not 3. The rudders and mast are sold. I'll list more parts in another ad.

NACRA masts & other parts

Mon, 09 Dec 2024 12:22:03 -0500

by: jcasto1

Description: I have 3 several NACRA masts - 5.7, 5.2 and 5.0

Hobie 17 Wing Tramps

Sat, 07 Dec 2024 10:36:19 -0500

by: Dogboy

Description: Hobie 17 OEM Vinyl Wing Tramps What you see is what you get. They’re crusty and musty, but maybe you have an old boat with fried tramps that you just want to get on the water without spending for new. $35 for the pair. Buyer pays shipping. Contact via email link if you have questions or need other pictures.

Nacra 17 olympic design

Thu, 14 Nov 2024 07:50:19 -0500

by: af8mail

Description: Nacra 17 olympic sailing catamaran 2013 made in france all good condition, normal wear and tear. the only problem mast is broken and parting or selling half price without mast comes with full set of sails including 2 spinakers please inquire re details, asking for 5000 OBO all parts including price reflects the mast situation, with mast would be 14k comes with beach wheels but no trailer local delivery available spinaker $750 Bowspirt $450 snufferring $175 Trampoline $600 Boat cover $350 Front crossbar $1500 Rear crossbar $1000 Eurotrax cat wheels $ 450 Mainsheet system $1200 Mainsail with bag cover $1500 Jibsail $600 Rudder with rudder casting and rudder arm and cover $2300 both or $1200 each Daggerboard blades with covers $450 each main and jib- 1100 obo 2 spinaker white racing good condition and blue all rigging and broken mast can be stripped for parts located palm beach more photos available upon request delivery available locally

Seaway hardware for H 14 and Harken triple block

Thu, 31 Oct 2024 12:54:00 -0400

by: azz5cat

Description: Mainsheet blocks, cleat and traveler car for H14, all original Seaway. Used but a lot of life left. A Harken triple bullet- block new trapese buckel used but like knew a small Harken block with 4 sheaves (Anyone know what this is?)

Hobie SX 18 Comptip mast

Sun, 20 Oct 2024 10:18:28 -0400

by: wils88

Description: Hobie SX 18 comtip mast very good condition k

Velocitek ProStart and mounting cradle

Tue, 23 Jul 2024 10:02:49 -0400

by: lakewateree

Description: Velocitek prostart, well loved but functions perfectly. Comes with a new mounting cradle. Can ping start lines, measure heading and speed. $275 shipping included in the continental US.

Harken ceramic GP mainsheet

Mon, 22 Jul 2024 17:17:20 -0400

by: lakewateree

Description: Harken Ceramic GP Mainsheet. Can be set up s 12:1, 11:1, or 10:1, currently set as 11:1. Comes with instructions manual and carry bag. Very little use, perfect condition. Can sell without sheet for $1100. Will ship at cost.

Harken parts and rigging

Thu, 27 Jun 2024 08:49:34 -0400

by: mysterexl

Description: Harken: 40mm carbo T2 w/soft loop 57mm carbo T2 w/ soft loop 57mm carbo fiddle 425G flairlead 424BL micro fairlead Supercat spinpole base Supercat mast hook Supercat mast hound

Harken Hardware

Tue, 04 Jun 2024 22:48:53 -0400

by: davidsd

Description: Items are from a 1990 Nacra 5.5.All in good condition. Make offer for what you need or all.

Hobie 21 SC mast for sale

Mon, 20 May 2024 15:15:54 -0400

by: EricBrislawn

Description: Contact me for pics and details.price reduced… 847-922-7391 Ebrislawn@comcast.net

Hobie 17 Sail foot Boomlet

Wed, 03 Apr 2024 17:29:33 -0400

by: rwallace52

Description: Hobie 17 sail foot Boomlet is brand new. $50 plus shipping call and leave a message Thank you

Hobie 17 Sail foot Boomlet

Wed, 03 Apr 2024 17:12:11 -0400

by: rwallace52

Description: Hobie 17 Sail foot "Boomlet" brand new; $50 plus shipping; call and leave a message

Mast Cradle, Blocks, shackels, dog bones

Tue, 02 Apr 2024 20:41:09 -0400

by: MN3

Description: Buy everything or individual items harken ratchamatic 57carbos - $40 each (over $130 each new) Mast cradle - $75 Dog bones - $20 for all 3 Shipping not included.

Hobie 18 CompTip Brand New Still in Factory Bubble Wrap. Asking $350.00 plus Shipping

Thu, 28 Mar 2024 19:44:10 -0400

by: boston

Hobie 16 Jib Block Car

Mon, 04 Mar 2024 17:16:09 -0500

by: ecsailboats

Description: Replacement jib car and Harken block that fits Hobie 14 and 16. 2 available. Shipping not included

Hobie Tiller Connector Kit

Mon, 04 Mar 2024 16:58:17 -0500

by: ecsailboats

Description: Kit for connecting 2 tillers to a crossbar. Fits standard Hobie Cat rudder assembly on Hobie 14,16,17 and 18. 6 available. Shipping not included.

Hobie Getaway Forward Tramp Black

Mon, 04 Mar 2024 16:37:53 -0500

by: ecsailboats

Description: Brand new black forward trampoline for a Hobie Getaway. 2 available. Shipping not included

Rudder Cam Kit Hobie 14/16

Mon, 04 Mar 2024 16:34:07 -0500

by: ecsailboats

Description: Replacement rudder cams and pins. Fits Hobie 14 and 16. 12 available. Shipping not included

Rudder Cam Kit Hobie17/18/20

Mon, 04 Mar 2024 16:26:37 -0500

by: ecsailboats

Description: Replacement rudder cams and pins. Fits Hobie 17, 18, and 20. 4 available. Shipping not included

Hobie Getaway Wing Cover Grey

Mon, 04 Mar 2024 16:11:16 -0500

by: ecsailboats

Description: Brand new grey wing covers for a Hobie Getaway. 4 available. Shipping not included.

Hobie Getaway Tramp Grey

Mon, 04 Mar 2024 16:07:22 -0500

by: ecsailboats

Description: Brand new grey trampoline for a Hobie Getaway. 2 available. Shipping not included.

Hobie 16 Tramp Black Mesh

Mon, 04 Mar 2024 16:00:12 -0500

by: ecsailboats

Description: Brand new black trampoline for Hobie 16. 3 available. Shipping not included

Hobie 21 SE MAST

Thu, 15 Feb 2024 18:14:13 -0500

by: EricBrislawn

Description: Hobie-21 SE MAST. Good condition.price reduced. Base and comptip can be sold together or separately. Mast is in two pieces for easier transport ,but can be reconnected if desired. Enrislawn@comcast.net 847-922-7391

Hobie 18 Wngs

Tue, 26 Dec 2023 18:58:46 -0500

by: billymac888

Description: Hobie 18 Wings in good condition

Nacra 5.8 Cross Beams

Thu, 14 Dec 2023 19:22:40 -0500

by: seanziepop

Description: 1990 Nacra 5.8 cross beams. Name your price. they are in good shape, the anodizing is still nice on them both. Located in San Diego, CA

HOBIE 18

Mon, 23 Oct 2023 10:53:50 -0400

by: wingwalker

Description: Traveling from western Pennsylvania to Miami Florida October 29,2023 and other times, and I'm willing to pick up and transport Hobie parts for the gas it takes to get them picked up, as I travel south. I also have hulls, wings, trailers and sails. You will need to leave a message to get a call back.

Harken Swivel Cleats (minus the cleat)

Thu, 17 Aug 2023 14:36:25 -0400

by: mikekrantz

Description: Brand New Harken Swivel Cleats (H299) that have had the cleat removed. Buy these for $20 each, add the micro cleat for $35, and you still come out way less than the $85 these normally cost Add $10 per shipment anywhere in the USA

Hobie SX18 mast and Whirlwind sails

Thu, 13 Jul 2023 21:05:51 -0400

by: wwkbob

Description: Hobie SX18 mast. Good condition. $100. Whirlwind Pentex sails. Fair condition. $150.

Tornado rig and sails

Mon, 12 Jun 2023 16:20:27 -0400

by: DaveA

Description: Mast and complete rig from a 1980s Tornado. Aluminum mast, not a prebend rig all standing rigging including trapeze wires shrouds boom Randy Smyth dacron main and jib new or only used a couple times. Perfect condition. I keep trying to convince my friends with Getaways to upgrade! I can get pics if you are interested.

Playcat sails

Mon, 12 Jun 2023 16:17:15 -0400

by: DaveA

Description: Original OEM Playcat main sail by Escape. Includes battens. brand new. Clear mylar with blue trim.

cat trailer for sale

Mon, 12 Jun 2023 16:15:23 -0400

by: DaveA

Description: galvanized trailer. Large size for 18-20 foot cat. front and rear mast support sail box aluminum tool box

Hobie sail box for sale

Mon, 12 Jun 2023 16:10:44 -0400

by: DaveA

Description: used, good condition

Hobie 16 mast base and mast step BRAND NEW

Fri, 26 May 2023 14:11:20 -0400

by: mscussat

Description: Hi, Last Christmas I was in Italy and I purchased a mast base-mast set from the local Hobie dealer for my Hobie 16. At the end I decided to repair my existing set instead of replacing it with a new set. Since I am not planning to replace the mast base and mast step on by boat, I decided to sell them as a combo. They consist of authentic components procured for a legitimate Hobie dealer in Italy as shown in the attached invoice. The instruction on how to replace them can be found here: https://www.hobie.com/forums/viewtopic.php?t=7079 Thank you for your interest. Marc PS: Shipping will be paid by the buyer.

Supercat 20 rudder and casting, may fit SC-19 -Price drop

Mon, 08 May 2023 21:47:54 -0400

by: adventuretri

Description: Supercat 20 rudder and casting in great shape. Can ship if needed. 36zero-319-1two86

Prindle-19 hull - Big Price Drop

Mon, 08 May 2023 21:37:05 -0400

by: adventuretri

Description: Prindle-19 port hull with kick-up centerboard. Could be used to replace damaged hull on existing cat, or would make great center hull for mini-trimaran. Decent shape, foam core, no soft spots, but needs a paint job. Located Burnet, TX, near Austin. May be willing to meet part way, depending on location. $250. 3six0-319-1two86

Hobie 18

Sat, 29 Apr 2023 13:19:15 -0400

by: chazbsalvo

Description: Hobie 18 Mast with internal shrouds Hobie 18 dagger boards, good shape not warped or delamination Hobie 18 Boom Hobie 18 cross bars in good shape

Hobie 18/20 Comp Tip and 18SX wing struts

Tue, 04 Apr 2023 15:43:34 -0400

by: TroyS

Description: Hobie 18/20 Comp Tip - brand new, still in factory bubble wrap. These last sold for $939. Asking $450 (firm). Prefer not to ship, so NCAL pickup best. Like the comp tip, the SX wing struts are no longer available from Hobie. One is brand new, never used (see pic with strut missing rivet holes). The other two are from my personal H18SX and were repaired by a professional welder after I discovered a small stress crack at the joint. They are both 100% now. $150 for the new one and $100 for each of the repaired struts. Preference is to sell all three at the same time. Willing to ship these as they can be boxed and are light. Everything is in Sacramento, CA.

OMEGA Sailing Harness

Tue, 04 Apr 2023 13:58:36 -0400

by: rwallace52

Description: OMEGA Sailing Harness - two of them like new. Call about shipping

NACRA and Inter beam caps

Fri, 31 Mar 2023 07:25:22 -0400

by: sduff

Description: Replace all 4 of those lost, cracked or broken beam caps with an alternative to $30 a piece cap. These caps are 3D printed. 2 front caps with holes for trapeze bungee and 2 rear solid caps. Caps can be retained either by using a clear silicone adhesive or by installing a small screw or 2 thru the beam into the cap. Keep birds, yellow jackets and bees from calling your catamaran â€œhomeâ€. Fits NACRA 4.5, 5.0, 5.2, 5.5, 5.7, 5.8, 6.0, 6.0NA and Inter catamarans with 4" beams. Shipping via USPS to continental US.

Hobie 18 boom and main sheet blocks with main sheet.

Sat, 11 Mar 2023 14:42:08 -0500

by: vickimark

Miscellaneous Catamaran and Prindle Parts

Sun, 13 Nov 2022 19:26:36 -0500

by: JohnES

Description: Two Prindle Classic style rudders. Used twice, once on a Prindle 18 Classic and a Prindle 18-2 â€“ and they worked pretty well on the 18-2 once the helm was balanced. These are just about as brand new as you can get. $300.00 for both (sold in set) and this includes the rudder hardware. Metal Wheeled Prindle Traveler Car â€“ metal wheels are NLA, and this was the â€œhotâ€ upgrade in its time. $90.00 Harken 57mm Jib Block set (sold as a pair only). Never used. They are $400 new, $200.00 â€“ SOLD AS SET ONLY Original Harken Jib Block â€“ standard on all Prindle and Nacra. These things are bulletproof - $65.00 Prindle Aluminum Rudder Pins - $10.00 Two Davis wind vanes â€“ ever hit a wave head-on and notice something missing up front? There went $45 dollars. Here are two you can keep as spares; youâ€™ll need the mounting hardware for $20 for the pair. All prices do not include shipping and freight