Note that if you have elected to place your ports between the pylons, it is suggested that the trampoline be completely removed prior to starting the job.

Make sure your hulls are secured to your trailer at the front and rear. Unlace the trampoline.
Remove the trampoline from the front cross bar.
Remove the trampoline from the side rails.
Remove the bolts from the rear pylons.
With the help of an assistant, remove the aft cross bar by sliding it off the aft pylons, both sides as equally as possible. The side rails can now be removed from both the aft and forward castings.
You now have a clear working area to install the ports. Once completed, reinstall the trampoline in the reverse order of removal.

Back to deck port installation