Both Hulls have developed cracks running from the bow 3/4 ot the way to the tramp. One has a crack on the bottom and the top. The other just the bottom. Anyone seen this problem before? Suggestions welcome!!! Thanks, Floyd
Posted: 09.07.2008, 11:41
rank:
Mate
registered:
November 2002
Status:
online
Posts:
124
This doesn't sound good, this is a high stress area. Take the boat to a qualified fiberglass guy for a look. Most fiberglass problems can be fixed, but if the hull explodes it won't be worth it.
I have seen this before on Hobie 16s and one Hobie 18. The sailor took out the Hobie 18 and while on a beam reach the leeward hull separated into two pieces. It is a very high stress area and cracks that length could spell disaster. It also depends on the width and depth of the cracks in the hulls. If its spider-cracking you don't have as much to worry about, but definitely take it to a trusted fiberglass shop and see how much it will cost to fix...it might not be worth the cost to fix.
Posted: 30.07.2008, 05:58
rank:
Lubber
registered:
July 2008
Status:
offline
last visit:
30.07.08
Posts:
1
Just completed filling and fairing a 6 ft crack in my H -18. Be glad to share process and pics...
Posted: 30.07.2008, 06:55
rank:
Mate
registered:
November 2002
Status:
online
Posts:
124
That would be great, could you create a new album in the "Beachcats Technical" section and upload your pics there?
You can upload the pics first, then use the "edit captions" feature to add descriptions to each pic.
