logo catamaran sailing at TheBeachcats.com
    
Lost Password?  Register free!

Supporters of TheBeachcats.com

Thanks go to our
Business Sponsors

 

You can help too!


Ad Block


Bottom
Hobie Cat 18 Hulls
  • Posted: 04.07.2008, 16:42
       
    rank:
    Lubber Lubber
    registered:
     April 2008
    Status:
    offline
    last visit:
    04.07.08
    Posts:
    1
    Any body know how to take the decks off a Hobie Cat 18?
  • Posted: 23.10.2008, 00:41
     
    pepsi
    rank:
    Lubber Lubber
    registered:
     October 2008
    Status:
    offline
    last visit:
    19.11.08
    Posts:
    26
    I have a h18 and have had other boats as well,when the boat is made and they come to the stage of putting the top deck on, like most speed boats that are made of fiberglass, They use a one part glue like liquid nails. what i would do is open up one of the inspection hatches ''the big one'' and use a mirror and torch so you can see where the glue line is. This will intern give you insight into your problem that you simply cannot see by looking on the out side. And you should mention why you need to take the deck off, There can sometimes be easier ways to do things,that don't always present themselves at first glance. I hope this has helped you. CHEERS PEPSI icon_biggrin icon_biggrin icon_biggrin

    --
    pepsi
    --
  • Posted: 23.10.2008, 03:28
     
    andrewscott
    rank:
    Mate Mate
    registered:
     June 2006
    Status:
    offline
    last visit:
    13.11.08
    Posts:
    162
    pepsiis open up one of the inspection hatches ''the big one'' and use a mirror and torch




    He means FLASHLIGHT.. not flame-thrower!!!

    I had a friend rip the deck lids off by running aground and the daggarboard ripped out from below... but i would not recommend that method


    --
    Andrew Scott
    Mystère 5.5

    --
  • Posted: 23.10.2008, 08:06
     
    popeyez7
    rank:
    Lubber Lubber
    registered:
     April 2004
    Status:
    offline
    last visit:
    02.11.08
    Posts:
    45
    Andy.... yer funny~~ LOL icon_lol

    --
    popeyez7
    --
  • Posted: 23.10.2008, 15:05
     
    pepsi
    rank:
    Lubber Lubber
    registered:
     October 2008
    Status:
    offline
    last visit:
    19.11.08
    Posts:
    26
    THERE IS A WAY,,PATIENCE MY YOUNG BOAT BUILDER, THAT IS THE WAY icon_biggrin icon_biggrin icon_biggrin icon_biggrin

    <!-- editby -->

    edited by: pepsi, Oct 23, 2008 - 09:12 PM<!-- end editby -->

    --
    pepsi
    --
  • Posted: 23.10.2008, 15:09
     
    pepsi
    rank:
    Lubber Lubber
    registered:
     October 2008
    Status:
    offline
    last visit:
    19.11.08
    Posts:
    26
    andrewscott
    pepsiis open up one of the inspection hatches ''the big one'' and use a mirror and torch




    He means FLASHLIGHT.. not flame-thrower!!!

    I had a friend rip the deck lids off by running aground and the daggarboard ripped out from below... but i would not recommend that method


    NO FLAME THROWER ALLOWED, THATS RIGHT YOU WILL HAVE TO USE A TORCH ''THE ONE WITH BATTERIES''


    --
    pepsi
    --
  • Posted: 23.10.2008, 15:14
     
    pepsi
    rank:
    Lubber Lubber
    registered:
     October 2008
    Status:
    offline
    last visit:
    19.11.08
    Posts:
    26
    COM'ON guys why has no one suggested a can opener icon_biggrin icon_biggrin icon_biggrin

    --
    pepsi
    --
  • Posted: 23.10.2008, 15:17
     
    pepsi
    rank:
    Lubber Lubber
    registered:
     October 2008
    Status:
    offline
    last visit:
    19.11.08
    Posts:
    26
    pepsiI have a h18 and have had other boats as well,when the boat is made and they come to the stage of putting the top deck on, like most speed boats that are made of fiberglass, They use a one part glue like liquid nails. what i would do is open up one of the inspection hatches ''the big one'' and use a mirror and torch so you can see where the glue line is. This will intern give you insight into your problem that you simply cannot see by looking on the out side. And you should mention why you need to take the deck off, There can sometimes be easier ways to do things,that don't always present themselves at first glance. I hope this has helped you. CHEERS PEPSI icon_biggrin icon_biggrin icon_biggrin


    PS You might not see a glue line, if not HMMMM trouble ahead i forsea icon_biggrin icon_biggrin icon_biggrin


    --
    pepsi
    --
  • Posted: 11.11.2008, 15:32
     
    pepsi
    rank:
    Lubber Lubber
    registered:
     October 2008
    Status:
    offline
    last visit:
    19.11.08
    Posts:
    26
    Something i never Thought of,,,,Mabe you want to Make a Mould, icon_lol icon_lol icon_lol

    --
    pepsi
    --
  • Posted: 19.11.2008, 10:56
     
    turbohobo
    rank:
    Lubber Lubber
    registered:
     October 2006
    Status:
    offline
    last visit:
    19.11.08
    Posts:
    29
    Hey Pepsi

    I still use the term "torch" when I mean "flashlight", I also use the term "robot" when referring to a traffic light. Football is played with the foot and I still have problems driving on the wrong side of the road sitting on the wrong side of the car. Vasbyt Swaer. icon_confused



    --
    Robert Braid
    Columbia MO
    On-The-Edge-Of-No-Control
    --
  • Posted: 19.11.2008, 15:50
     
    pepsi
    rank:
    Lubber Lubber
    registered:
     October 2008
    Status:
    offline
    last visit:
    19.11.08
    Posts:
    26
    Hey Rob,I like the robot term, anyway there is no glue line like in a power boat/speed boat, when they put the top deck on the lip also came over with the bottom hull lip,,meaning impossible to find join, so looking in hulls will get you know closer to the answer, even with a flashlight/torch. Cheers icon_biggrin icon_rolleyes icon_rolleyes

    --
    pepsi
    --