search pnForum [1] latest posts [2] Note: Registered users can subscribe to notifications about new posts [3] Note: Registered users can subscribe to notifications about new posts [4]

to previous topic [5] Print topic [6] to next topic [7]

Start [8] ::  Catamaran Sailing [9] ::  Technical Help [10] ::  Hobie 17 side stay/base pulled out of hull

Bottom [11] 

Hobie 17 side stay/base pulled out of hull
stubbedoo [12] Posted: 06.05.2008, 11:38
Lubber
Lubber


registered: Apr. 2006
Posts: 2

Status: offline
last visit: 08.05.08 		Hello everyone,
Just needing some help with the starboard stay/base that pulled out of the hull. Is this a fatal injury or can it be repaired? Any idea on cost either to replace or fix? The rear wing sleeve is leeking a bit on the same hull. I think I have an idea of how to fix the sleeve. Any help would be appreciated.
Thanks,
John
(spacecoast Fl.)
Top [13]  Profile [14] send PM [15] Homepage [16] [17]
 
Rockets [18] Posted: 07.05.2008, 17:13
Lubber
Lubber


registered: May. 2006
Posts: 1

Status: offline
last visit: 07.05.08 		Is this what you're talking about? http://www.hobiecat.com/community/viewtopic.php?t=9293
If so, you might be able to use a drill and an easy out to remove the rest of the stud.

Good Luck
Top [19]  Profile [20] send PM [21] Homepage [22] [23]
 
stubbedoo [24] Posted: 08.05.2008, 09:48
Lubber
Lubber


registered: Apr. 2006
Posts: 2

Status: offline
last visit: 08.05.08 		Not quite. That threaded piece and the round bar it is screwed into pulled out of the the hull.
Top [25]  Profile [26] send PM [27] Homepage [28] [29]
 


Users online:
garybennett2001 [30]

This list bases on the users active in the last 60 minutes